RedBoot> load -v -r -b 0x80000 zImage ** Error: Illegal command: "" RedBoot> load -v -r -b 0x80000 zImage Using default protocol (TFTP) Raw file loaded 0x00080000-0x00257393, assumed entry at 0x00080000 RedBoot> exec -r 0x1000000 -s 0x1000000 -c "root==/dev/ram console=ttyAM ro" 0xc 0080000 Using base address 0x00080000 and length 0x001d7394 Uncompressing Linux............................................................. ............................................................. done, booting the kernel. Linux version 2.6.20.4 (arm@homedepot.crystal.cirrus.com) (gcc version 4.1.1) #1 PREEMPT Mon Jul 23 09:40:03 CDT 2007 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 Machine: Cirrus Logic EDB9315A Evaluation Board Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Built 1 zonelists. Total pages: 16192 Kernel command line: root==/dev/ram console=ttyAM ro PID hash table entries: 256 (order: 8, 1024 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 32MB 32MB = 64MB total Memory: 44468KB available (3536K code, 342K data, 132K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 ep93xx: PLL1 running at 399 MHz, PLL2 at 192 MHz ep93xx: FCLK 199 MHz, HCLK 99 MHz, PCLK 49 MHz SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 2048 bind 1024) TCP reno registered checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 16384K NetWinder Floating Point Emulator V0.97 (extended precision) audit: initializing netlink socket (disabled) audit(8.180:1): initialized JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. io scheduler noop registered (default) io scheduler anticipatory registered Console: switching to colour frame buffer device 80x30 fb0: EP93xx frame buffer at 640x480x16bpp ep93xx_wdt: EP93XX watchdog, driver version 0.3 (nCS1 disable detected) Serial: AMBA driver $Revision: 1.41 $ apb:uart1: ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA apb:uart2: ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA apb:uart3: ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA RAMDISK: wrong blocksize 8096, reverting to defaults RAMDISK driver initialized: 2 RAM disks of 32768K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Cirrus Logic EP93XX IDE initialization. physmap platform flash device: 02000000 at 60000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled cmdlinepart partition parsing not available Searching for RedBoot partition table in physmap-flash.0 at offset 0xfe0000 7 RedBoot partitions found on MTD device physmap-flash.0 Creating 7 MTD partitions on "physmap-flash.0": 0x00000000-0x00040000 : "RedBoot" 0x00040000-0x00200000 : "zImage" 0x00200000-0x007a0000 : "FS" 0x007a0000-0x00ea0000 : "USER" 0x00ea0000-0x00fe0000 : "unallocated" 0x00fe0000-0x00fff000 : "FIS directory" mtd: partition "FIS directory" doesn't end on an erase block -- force read-only 0x00fff000-0x01000000 : "RedBoot config" mtd: partition "RedBoot config" doesn't start on an erase block boundary -- forc e read-only ep93xx-usb ep93xx-usb: EP93xx OHCI ep93xx-usb ep93xx-usb: new USB bus registered, assigned bus number 1 ep93xx-usb ep93xx-usb: irq 56, io mem 0x80020000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected usb 1-2: new full speed USB device using ep93xx-usb and address 2 usb 1-2: not running at top speed; connect to a high speed hub usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) usbcore: registered new interface driver rtl8150 usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver ep93xx_udc: version 17-10-2006 USB Device Controller Chip ID :0 test chipID is wrong Are you sure the USB2 Slave Daughter Board Link on EDB931X? ep93xx-udc: probe of ep93xx-udc failed with error -16 mice: PS/2 mouse device common for all mice i2c /dev entries driver **WARNING** I2C adapter driver [EP93XX I2C bit-bang interface] forgot to specify physical device; fix it! isl1208 0-006f: chip found, driver version 0.2 isl1208 0-006f: rtc core: registered isl1208 as rtc0 Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). snd_ep93xx_probe - enter Cirrus Logic ep93xx i2s audio initialized ALSA device list: #0: Cirrus Logic I2S Audio with CS4271 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 NET: Registered protocol family 17 NET: Registered protocol family 15 isl1208 0-006f: setting the system clock to 2011-05-17 21:49:15 (1305668955) RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Please press Enter to activate this console. *